How To Change A Playstation 4 Controller Battery In 10 Easy Steps

The PlayStation 4 controller is a vital component of the gaming experience, and a dead battery can quickly put a damper on your gaming session. If you’re experiencing controller battery issues, don’t worry – changing the battery is a relatively simple process that can be completed in just a few minutes. In this comprehensive guide, we’ll walk you through the steps on how to change PlayStation 4 controller battery, ensuring you get back to gaming as soon as possible.

Step 1: Gather the Necessary Tools

Before you begin, make sure you have the following tools and materials:

• A Phillips head screwdriver
• A new PlayStation 4 controller battery
• A small bowl or container to hold the screws

Step 2: Power Down the Controller

To avoid any potential damage, power down the controller completely before starting the process. To do this, press and hold the PlayStation button on the controller until the light bar turns off.

Step 3: Remove the Back Panel Screws

Locate the four Phillips head screws on the back panel of the controller. Using the screwdriver, carefully remove all four screws and place them in the small bowl or container.

Step 4: Open the Back Panel

Once the screws are removed, carefully pry open the back panel of the controller. Be gentle and avoid using excessive force, as you don’t want to damage the controller.

Step 5: Locate the Battery

Once the back panel is open, you’ll see the battery located in the center of the controller. It’s usually held in place by a small clip or connector.

Step 6: Disconnect the Battery

Carefully disconnect the battery from the controller. Depending on the model of your controller, you may need to use the screwdriver to release a small clip or connector.

Step 7: Install the New Battery

Take the new battery and connect it to the controller in the same way you removed the old battery. Make sure it’s securely connected and seated properly.

Step 8: Reattach the Back Panel

Once the new battery is installed, carefully align the back panel with the controller and press it back into place. Secure it by tightening the four Phillips head screws you removed earlier.

Step 9: Test the Controller

Power on the controller by pressing the PlayStation button. The light bar should illuminate, indicating that the controller is functioning properly. If the controller doesn’t power on, double-check that the battery is properly connected and that the screws are tightened securely.

Step 10: Charge the Controller

Before using the controller, it’s recommended to charge it fully. Connect the controller to a PlayStation 4 console or a compatible charging station using a USB cable. The controller will automatically start charging, and the light bar will blink orange while charging. Once the light bar turns solid white, the controller is fully charged.

Troubleshooting Tips

If you’re experiencing issues with your PlayStation 4 controller after changing the battery, try the following troubleshooting tips:

• Make sure the new battery is compatible with your controller model.
• Double-check that the battery is properly connected and seated correctly.
• Clean the battery terminals with a cotton swab and rubbing alcohol to remove any dirt or debris.
• Try using a different USB cable to charge the controller.
• If the controller still doesn’t work, you may need to replace the controller entirely.

Key Points:

Changing the PlayStation 4 controller battery is a straightforward process that can be completed in just a few minutes. By following the steps outlined in this guide, you can easily replace the battery and get back to gaming without any hassle. Remember to handle the controller and its components with care to avoid any damage. If you encounter any issues during the process, refer to the troubleshooting tips provided or consider seeking professional assistance.